Table of contents on this page

What is a run bubble?

iRobot's cleaning robot, Roomba, is an epoch-making cleaning item that automatically cleans your room while you're out and doing other work. Do you know the word "rumba" related to such rumba?

"Roomba" is a coined word that refers to a state that is easy to clean in Roomba . It is made up of the two words "Roomba" + "able".

This time, we will explain how to create a "roomba" room for those who own rumba or who want to introduce rumba to their home in the future.

In addition, this explanation assumes that iRobot's Roomba will be used. If you use a cleaning robot from another manufacturer, it is recommended that you check the size in advance, as the dimensions may differ.

First, let's check the dimensions of "Roomba"!

In order to create a "roomba" room that is easy for Roomba to clean, it is important to know the size of Roomba first.

If you accidentally purchase furniture without knowing the size of Roomba, Roomba will not be able to pass through and dust and dirt will collect in the gaps and back space. In that case, you end up vacuuming by hand, which increases the time and effort of cleaning.

In order to prevent the rumba from becoming a treasure trove, let's grasp the space where the rumba can pass and secure the flow line.

There are several series of rumba announced by iRobot, but the height is around 9mm for all series. It is easy to understand if you think that it is a little shorter than the short side (10 cm) of the official postcard.

The maximum width is 310 to 353 mm, which is slightly different. There is a slight difference in weight, but you can think of it as about two 2L PET bottles.

The point of creating a room with a run bubble

As mentioned above, in order to make a room with a rumba, it is necessary to secure a flow line through which rumba can pass. Please pay attention to the following four points so that every corner of the room can be cleaned.

Point ①: Do not put anything on the floor

The main premise of a room with a run bubble is not to put anything on the floor . If you put something on the floor, Roomba will not be able to pass through or get caught, and you will not be able to clean it efficiently. If you leave small interior items, there is a risk of them colliding and breaking. Especially for those who usually live on the floor, which is called "low style", let's review the environment of the room again.

One of the tricks to reduce the amount of things you put on the floor is to use items that can be hung on the wall. Try to hang the trash can on the wall with hooks, store bags and clothes in the closet, etc., and reduce the number of things to put on the floor.

Point (2): Secure a gap of 10 cm under the furniture

The height of Roomba is 89-92mm, so if there is a space of about 10cm under furniture etc., Roomba can pass through .

Cleaning a 10 cm gap with a regular vacuum cleaner requires bending and reaching, which is very time-consuming. However, if you go to Roomba, it will automatically clean even hard-to-reach places without any hassle.

When purchasing furniture such as sofas and beds from now on, it is recommended to choose furniture with legs that are 10 cm or more in height. If your furniture has legs shorter than 10 cm, you may want to use some lifting goods to increase the height.

Take advantage of halo mode

If Roomba gets caught in a place less than 10 cm, it will be difficult for Roomba to escape on its own and will not be able to move. If such a thing happens while the owner is out, Roomba cannot be rescued.

That's where the rumba function called "Halo Mode" comes in handy. Areas that you do not want to go to Roomba can be "no entry". It can prevent not only places with height restrictions, but also places with many cables and places with fragile items.

Point ③: Steps should be within 2 cm

Roomba can be easily overcome if the step is up to 2 cm. For this reason, it is advisable to choose rugs and carpets with a thickness of 2 cm or less to be laid on the floor . Conversely, if the height is within 2 cm, it can be said that there is no need to bother to remove small steps such as the power cord and door frame.

However, even if the thickness is less than 2 cm, if the rug or carpet is too thin, Roomba may turn over or slip underneath, making it impossible to clean it. If you are using a thin rug, it is recommended to fix the rug to the floor with non-slip tape.

Also, long-haired rugs should be avoided in a room with a run bubble. Roomba brushes can get tangled. There are only a limited number of rugs that Roomba is good at, so it's a good idea to try it once to see if you can clean it properly.

Point ④: Creating a flow line considering the width of rumba

Basically, Roomba can be cleaned without any problem if there is a space with a width of 36 cm or more. In the case of a space narrower than 36 cm, some series of Roomba cannot enter, so there will be a place left uncleaned. Therefore, it is necessary to pay attention to the arrangement of furniture and home appliances.

Easy-to-move items such as chairs only need to be moved during cleaning time, but if you want to make a room with a lot of trouble, it is recommended to have a layout that does not create a small space from the beginning. Let's install furniture while paying attention to the flow line so that Roomba can clean the room evenly.

Choosing furniture to get the most out of Roomba

What kind of furniture should be prepared to make a room that is rumbling?

From here, we will introduce the features of furniture that can make the best use of Roomba. If you want to make a room with a run bubble, please refer to it.

bed

The area under the bed is difficult to clean with a normal vacuum cleaner, especially near the walls, where dust and dirt tend to collect.

To get the most out of Roomba, we recommend a bed with legs that are 10 cm or more in height. Do not put storage items under the bed and leave them empty. Roomba cleans every corner of the bed.

sofa

If you are aiming for a room with a run bubble, it is recommended that the sofa has legs that are 10 cm or more in height, just like the bed.

If you place the table in front of the sofa, make sure there is at least 36 cm between the sofa and the table. This will allow Roomba to clean the area around the sofa without getting caught.

Dining chair

Some dining chairs allow the arm to rest on the dining table and the legs of the chair to float. It is recommended because you can easily secure the flow line of rumba.

If you're using a chair that won't get caught on the dining table, keep at least 36 cm away from the table just while cleaning. It is also an effective way to secure the flow line by placing the chair on the table with the seat side down.

Comfortable cleaning time in a room with a run bubble!

If you make a room that is "roomba", which means that it is easy to clean with Roomba, you can make the most of the functions of Roomba and reduce the time and effort of cleaning. In order to make a room with a run bubble, it is necessary to hold down some points such as "securing enough space" and "keeping things on the floor as little as possible".

By making the room a room bubble, not only is it easy to clean, but it also makes the room look neat and tidy. Let's realize a more comfortable life in Roomba by referring to the method introduced this time ♪

* The information in this article is current as of February 7, 2022.

Search for rental properties from popular stations in Tokyo Tokyo Station Sangenchaya Station Yoyogi Uehara Station Ebisu Station Nakameguro Station Oimachi Station Koenji Station Ogikubo Station Musashikoyama Station Kichijoji Station

Search for rental properties along popular Tokyo lines Seibu Shinjuku Line Chuo Line Marunouchi Line Tozai Line Fukutoshin Line Yurakucho Line Toei Oedo Line Tobu Tojo Line Tokyu Ikegami Line Hanzomon Line

Related article: